The WarriAir Paintball regulators from GladiatAir are a stylish matte black colour and incorporate a number of features to provide a high level of performance and reliability.
The WarriAir paintball regulator is pre-set with a standard output within the 700 - 900 PSI range. By removing 2 disc springs, output pressure range can be reduced to 400 - 600 PSI.
The 3000 PSI Reg has a slightly larger gauge than the industry standard, so it is easier to read the pressure.
The 4500 PSI Reg has a flow restrictor on the inlet supply (cylinder to reg) to reduce the chance of blowing the low pressure burst disc.
Both paintball regulators are fitted with a filter on the filling adapter to reduce the amount of dirt that gets into the tank, which should prevent problems associated with the paintball regulator not sealing due to particles on the sealing edge and burst discs rupturing.
The 3000 PSI Reg is fitted with a 4.5K PSI Burst Disc and the 4,500 PSI Reg is fitted with a 6.7K PSI Burst Disc. In accordance with best global practice and AS/NZ Standards burst disc pressure should be equal or below cylinder test pressure. WarriAir paintball regulators comply with the test pressure requirements on GladiatAir Paintball cylinders.
Body height of regulator is approx 40mm - please refer to last image for clarification.
|Product Code||Description||Length mm||Weight KG|
|R4500A||WarriAir Paintball Regulator 4500||58||0.131|
|R3000A||WarriAir Paintball Regulator 3000||58||0.137|
This product hasn't received any reviews yet. Be the first to review this product!